Holiday break: last dispatch 26 Nov 2026 · Away 27 Nov–10 Dec · Dispatch resumes 11 Dec
Home & storage

Cordless Drill and Impact Driver Wall Holder

£8.23

Made to order

Keep cordless tools organised with an open wall-mounted cradle. The reinforced twin-arm design supports a suitable tool beneath its motor housing, leaving the handle and battery below.

Size
Standard
Colour
Black

GB delivery from £2.99 · Dispatch within 1–2 working days

Choose your options

Choose all options to see the exact price.

Delivery options for this product

Standard

  • Small parcel (tracked)£2.99

Express

  • Small parcel (tracked, next day)£4.99

Choose a service for this item in your basket. Items using the same service share one charge at the highest listed rate; different services are charged separately.

View basket

Product details

Keep cordless tools organised with an open wall-mounted cradle. The reinforced twin-arm design supports a suitable tool beneath its motor housing, leaving the handle and battery below. Rounded edges, recessed fixing positions and an industrial profile give it a tidy workshop finish. Check the dimension guide against your tool before ordering. Printed in black PETG in the UK. You receive one wall holder, plus 3 screws and 3 wall plugs. Tools are not included. Like all 3D-printed items, it is built layer by layer, so you may see faint layer lines or very minor surface marks. These are normal and every piece is inspected before posting. SIZE GUIDE (Standard) The slot is the opening your handle must pass through. It is not a barrel-diameter rating. The guide clearance is the internal width between the arms, where the motor housing sits. These figures alone do not prove that a particular tool will fit - measure yours. - Handle-slot opening: 40 mm - Internal guide clearance: 70 mm - Arm reach from the backplate: 108 mm - Overall projection from the wall: 113.6 mm - Backplate (W x H x thickness): 89 x 96.5 x 5.6 mm CHECK YOUR TOOL BEFORE YOU ORDER 1. Measure the widest part of the handle that has to pass through the slot. It must be less than 40 mm. 2. Measure the width of the motor or gearbox housing that will rest on the arms. It must be less than 70 mm. 3. Check there is a clear path underneath for the handle, trigger and battery to hang below the housing, and that 108 mm of arm reach is enough to support the housing. 4. Confirm your wall and fixings can carry the tool. Use all three fixing positions. This is not a universal fit. If your measurements are close to the limit, message us with them before ordering. DISPATCH Posted within the UK. Delivery is chosen at checkout and paid separately.

Size
Standard
Colour
Black
Material
PETG
Supplied with
3 screws and 3 wall plugs

Fit & installation

Unsure about a size or fitting? Send measurements or a photo before ordering so we can check the details with you.

Ask about fit or request a custom size

Safety & care

Important MOUNTING Use all three recessed fixing positions. Holes are 4.6 mm with a 9.2 mm maximum head and a 90 degree countersink. Centres: two upper holes 24 mm either side of centre, 29 mm above the plate mid-line; one lower hole on the centre line, 34 mm below. Fit only to a sound wall that can safely hold the holder and the tool (solid masonry or suitable fixed timber - not weak plasterboard alone unless properly anchored). The 3 screws and 3 wall plugs supplied may not suit every wall, so check your fixings suit your wall type and the load, and use suitable alternatives if needed. Avoid pipes and cables when drilling. Tighten by hand without crushing the plate. Check the holder and the fixings regularly. Do not store a hot tool in the holder; let it cool first. Printed in the UK by Voxel Vibes.

Need a different size or fitting?

Send the measurements or a photo with a custom request. We’ll get back to your request as soon as possible.

Request a custom model